EW65

EW65 mobile excavator excavating a pipe trench in the filed

Wheeled excavator EW65: Power and speed, perfectly combined

The EW65 wheeled excavator drives itself to the work site of thanks to the installed road travel mode and does not require time and cost-intensive transport. The variable drive system has a low rate of fuel consumption and, with just one pedal, drives almost like a car. The powerful load-sensing hydraulic system (LUDV) also ensures the same speed for several movements with different loads. With 5 control circuits — of which 3 are individually adjustable — and a triple boom, the EW65 is very efficient and quickly on the move.

Wheeled excavator EW65

3-point kinematics

  • With 3-point kinematics, conventional bucket linkage has been taken to a new level. This "3-bolt" design extends the bucket's angle of rotation to 200 degrees - 10% more than conventional bucket linkage. This increases the vertical dig depth as well as the digging forces. It is therefore no longer necessary to reposition the excavator as often, significantly increasing efficiency.
Wheeled excavator EW65

Intuitive operating concept

  • The intuitive operating concept enables simple and comprehensive control of the excavator. The machine is operated using a joystick, jog dial and keypad. Storing attachments and oil levels for the additional control circuits is thus done quickly and easily.
EW65 mobile excavator excavating a pipe trench in the filed

Optimal positioning of hydraulic components

  • Short hose paths result in lower power loss in the hydraulic system. This increases the service life of the hydraulic hoses due to fewer wear points, especially in narrow passages.
  • The clearly defined hose routing of the hydraulic hoses ensures maximum efficiency by reducing line resistance.
Wheeled excavator EW65

Powerful drive system with LUDV

  • Quick working cycles and more flexible applications thanks to the powerful drive system in combination with a load-sensing hydraulic system (LUDV) make controlling the excavator comfortable and fatigue-free. Irrespective of the load to be moved, the control movements on the joystick stay the same. Along with increased operating comfort, this results in a performance plus while simultaneously reducing consumption.
Studio photo EW65 with support pads photographed from the side

Articulated boom

  • The articulated boom provides more maneuverability and therefore greater freedom of action. Because the additional joint permits the bucket to be pulled right up to the travel gear or the dozer blade. Ideal when narrow spaces need to be accessed or an obstacle has to be moved out of the way. The excavator also features a greater dump height and even greater digging depth.

More Features

Wheeled excavator EW65

2 operating modes, ECO/POWER

  • The two preset operating modes ECO and POWER differ from each other in engine speed and pump power. They allow easy adjustment of the excavator to the activity to be performed in order to work in the optimal fuel consumption range. In ECO mode, the focus is on economy, while in POWER mode, the focus is on work performance.
Studio photo EW65 with outriggers from the side, photographed from behind

Individual support versions

  • Stable footing is essential especially during heavy excavation work or on difficult ground conditions. For support, operators can use a dozer blade or support stabilizers – both in front or in the rear or in any combination.
Wheeled excavator EW65

LED working lights

  • Optimum illumination enhances safety around the work area and provides a higher utilization of the machine at night or in poor lighting conditions. The LED technology also offers longer service life of the light fixtures.
Mobile excavator EW65

Low overall height

  • The intelligent component arrangement inside the machine ensures very low external dimensions, which makes it particularly suitable for use in tight construction site conditions and low clearance heights. This makes any transport as well as getting on and off the machine safer, easy and uncomplicated. The low center of gravity provides excellent stability.
Wheeled excavator EW65

Closed driving cycle

  • The closed driving circuit provides simple operation with just one drive pedal and allows for infinitely variable speed from 0 to 30 km/h/18.6 mph without needing to change gears.
Wheeled excavator EW65

Powerful automatic climate control

  • The automatic climate control system provides consistent cooling. The air conditioning system and fan operate until the set temperature is reached. The system then switches off and starts up again as soon as the interior sensors measure a deviation from the set temperature.
Wheeled excavator EW65

Niedrige Lärmemissionen

  • Quiet engine noise allows easy communication on the job site and less stress for the operator.
Wheeled excavator EW65

Heated seat

  • The heated seat creates comfortable working conditions for the operator – especially at low outside temperatures. At the same time, the air-cushioned seat ensures increased driving comfort.
Wheeled excavator EW65

Speed, 30 km/h/18.6 mph

  • Quickly moving between construction sites possible at up to 30 km/h/18.6 mph. Transport costs are eliminated; machine drives under its own power to the next work area.
Wheeled excavator EW65

7-inch display in combination with rear view camera

  • The large, multi-functional 7-inch color display ensures a perfect overview of all the machine’s functions and displays the respective camera images. The rearview camera on the excavator enables safer reversing. In addition, the view of the machine is better when it is rotated.
Wheeled excavator EW65

Innovative windshield system with rain cover function

  • The windshields can be adjusted to any condition on the construction site. Closed, they are water- and windproof. The upper front window can be pushed under the cabin roof. The lower windshield also serves as a splash guard. In the second locking position, it can be converted into a rain canopy quickly and offers the ideal opportunity to communicate with colleagues. If necessary, both windows are pushed below the cab roof, where they are stored safely.
  • The two-part front window allows for optimal ventilation in the cabin in any weather. In addition, it makes it easier to communicate with the operator. A separate removal and storage of the window is a thing of the past.
Wheeled excavator EW65

Cruise control

  • Cruise control enables the machine to drive straight forward automatically at a selected speed. Ideal for municipal work such as mowing, milling and mulching
EW65 mobile excavator excavating a pipe trench in the filed

Numerous attachments

  • Thanks to the optional additional control circuits, our excavators can be equipped with a variety of attachments. This way, you can increase your application options in no time and thus increase the utilization of your excavator.
Wheeled excavator EW65

Easy service and maintenance access

  • Easy service, thanks to a wide opening engine hood, allows easy access to all parts.
  • No disassembly of heavy parts necessary; also, easily changeable wear parts.
  • Fast and unrestricted access. Easily reachable hydraulic and engine oil filter, air filter, water trap and even the tank filler neck. Low service costs.
Wheeled excavator EW65

Thermal resistance

  • Working under full load up to an ambient temperature of 45°C is possible at any time. The stable temperature level results in a longer service life for the hydraulic components and increased productivity for the excavator.
  • Lower temperature level - longer life, work without loss of performance.
Wheeled excavator EW65

Up to 4 additional control circuits ex work

  • Thanks to the optional additional control circuits, our excavators can be equipped with a variety of attachments. Thus, in no time, application options are increased, which raises the utilization of the excavator.

Contact us

*Mandatory Field