WL28

Standard Components

  • Yanmar 3TNV80FT, 18.4 kW / 25 PS, EU: Level
  • Hydraulic articulated pendulum steering ± 8°
  • Steering cylinder: 1
  • 12 - 16.5 BKT SkidPower EM ET 0, EM tire, width 1250 mm, Höhe 2340 mm
  • Operator's canopy with ROPS / FOPS tested restraint system, driver's platform can be tilted to the side
  • Generous space in all operator's positions
  • Ergonomically spacious entry
  • Adjustable steering column (tilt and height)
  • Fully damped comfort seat with safety belt, weight, back and height adjustment
  • Work lights LED Basic (1000 lm) on the roof, 2 in front, 1 in back
  • Lighting in accordance with the StVZO
  • Axis: T94
  • Drive: Hydrostatic all-wheel drive, electronically controlled
  • Driving modes: Auto mode; ECO mode (engine speed reduction when the set speed is reached)
  • Speed: 20 km/h
  • Speed settings: 2 | 7 km/h / 20 km/h (Optional 30)
  • Service brake: Disc brake on the front axle acting on the rear axle via the driveshaft
  • Parking brake: Electro-hydraulic multi-disc brake with a spring-loaded accumulator in the front axle,
    About the driveshaft acting on the rear axle, including hill-hold function
  • Charging Station LS950 Lifting Height 2560 mm
  • Quick-change coupler (Wacker Neuson HV/HT-C) – hydraulic
  • Kinematic P
  • Lifting cylinder: 2
  • Tilt cylinder: 1
  • Floating position for lifting and tilting cylinders
  • Mechanically pilot controlled joystick with direction switch
  • 3rd Front control circuit via lever with single detent for continuous function
  • EquipCare (incl. App & Manager)

Options

  • Driver protection roof foldable EPS ROPS / FOPS certified
  • Cab 2-panel doors, including heating and ventilation
  • Cab 2-panel doors, including heating and ventilation
  • Windshield and rear window, including front and rear windshield wipers
  • Seat faux leather; air suspension
  • Seats with faux leather; air suspension; heated seats
  • Seat Fabric (Standard for Cabin)
  • Seat Fabric; Air Suspension
  • Seats Fabric; Air suspension; Heated seats; MSG93
  • Air conditioning
  • Radio pre-installation DAB (antenna, speakers)
  • Radio DAB (full range)
  • Roman shade
  • LED lighting in accordance with the German Road Traffic Licensing Regulations (StVZO)
  • Headlights and fog lights
  • Work lights LED Performance (2000 lm) on the driver's roll bar, 2 in front, 2 in back
  • Preparation Rotating Beacon
  • Rotating beacon LED (orange), (National regulations must be observed!)
  • Rotating beacon (orange) with magnetic base (National regulations must be observed!)
  • Individual operating permit < 25 km/h
  • Individual operating permit > 25 km/h
  • License plate holder (front and rear)
  • Warning sign triangular (National regulations must be followed!)

Drive

  • Diesel engine Yanmar 3TNV86 33.3 kW / 45 hp (operating range: -15°C to 45°C!)
  • Diesel engine Yanmar 3TNV86 40.1 kW / 55 hp (operating range: -15°C to 45°C!)
  • Hand throttle
  • Preheating: Coolant, hydraulic oil; 230 V
  • Preheating: Coolant, hydraulic oil; 230 V, Type J plug

Axles

  • Planetenachse PA940, hydrostatic medium-pressure all-wheel drive, 100% differential lock 20 km/h (30 km/h)
  • Planetary Axle PA940, Hydrostatic High-Pressure All-Wheel Drive, 100% Differential Lock at 20 km/h (30 km/h)
  • Thrust limitation

Driving mode

  • Driving Mode Auto / Eco / Attachments
  • Drive Mode Auto / Eco / M-Drive

Travel speed

  • 30 km/h (increase in speed)
  • Speed limiter proportional (slow-speed control)

Tires

  • 31 x 15.50 - 15 BKT SkidPower HD ET0, EM tread, width 1345 mm, Höhe 2325 mm
  • 31 x 15.50 - 15 BKT SkidPower HD ET-37, EM tread, width 1419 mm, Höhe 2325 mm
  • 400/50 - 15 (31x15.5-15) Starco AS ET0, Profile AS, Width 1325 mm, Height 2320 mm
  • 400 / 50 - 15 (31x15.5-15) Starco AS ET-37, Profil AS, Width 1399 mm, Height 2320 mm
  • 31 x 15.50 - 15 BKT TracMaster ET0, Profile RP, Width 1350 mm, Height 2335 mm
  • 10 - 16.5 BKT SureTrax HD ET40, SureTrax tire, width 1128 mm, width when turned 1300 mm, height 2322 mm
  • 12 - 16.5 BKT SureTrax ET45, SureTrax tire, width 1175 mm, width when turned 1370 mm, height 2357 mm
  • 315/55R16 Continental MPT81 ET-30, MPT81 width, width 1305 mm, height 2305 mm
  • Tires turned

Quick-change plates

  • SkidSteer (hydraulic SAE J2513 SSL HV)
  • SMS HV (hydraulic)
  • Kramer HV / WL - C (hydraulic)
  • Lowering brake valve (with pipe rupture protection, lifting, and tilting cylinders), including float position
  • Load-dependent damping
  • Shell Panolin S4 HLP Synth46 (biohydraulic oil)
  • 3. Control circuit proportional incl. hold function % via switch, (pressure relief 3. Control circuit (front of the loading station), (oil volume adjustment), (Operation: (via the control wheel on the front of the joystick)
  • 4. Control loop proportional serial (Includes: CHY_LOADHYDA_007 3. Control circuit (proportional), including continuous operation via switch, <x id=\ Control panel at the front of the loading station, (Operation: (via the control wheel at the top of the joystick)</li>
  • Working hydraulics: 22.5 cc/min (58.5 l/min)
  • High-Flow Power Hydraulics, single-acting (84 l/min), including pressureless return and drain line, (two couplings: 1 x Flatface Size 4A, plug / 1x Flatface size 4A, female), (Operation: (switch (0 - 1))
  • Non-pressurized return line, front (1 x Flatface Size 3, plug) including leak detection line (1 x Flatface Size 2, plug)
  • Quick-connect coupling Faster 2-way machine-side
  • Quick-connect coupling Faster 2-way machine side attachment side
  • Quick-connect coupling Faster 2x 2-way - machine side
  • Quick-connect coupling Faster 2x 2-way machine side attachment side
  • One hydraulic connection at the rear, double-acting via a directional control valve (two SVK couplings, size 3), (3. Steering wheel (front or rear), (Operation: About the switch (0–1) 3. Control circuit)
  • Two double-acting hydraulic connections at the rear (four SVK size 3 couplings), including a separate control valve (25 l/min), (Operation: About 2 switches (1 - 0 - 2)
  • Unpressurized return line (rear) (1 x SVK size 3, plug) incl. leak detection line (1 x Flatface size 2, plug)
  • Additional control unit
  • Battery isolator switch 2 circuits (isolation of the vehicle electrical system and the generator from the battery via two separate switching paths)

Front electrical connections

  • Front socket, 13-pin (2x electrical functions E1/E2 and lighting), (Operation: About the 2 buttons on the joystick; 1. Function key, 2. Function lock)

Rear electrical connections

  • Rear 3-pin outlet (2x electrical functions E3/E4, switchable to front outlet), (Operation: About Switches; 1. Function lock, 2. Function lock)
  • 7-pin rear socket for lighting and rear-mounted equipment
  • Rear-view warning system (audible)
  • Immobilizer Ignition Key (Operation: (remote-controlled ignition key)
  • Immobilizer EquipCare Dual ID, (Operation: Über Keypad)
  • Custom paint job RAL solid color instead of Wacker Neuson yellow
  • Custom paint job RAL multicolor (Excludes front and rear axles)
  • Ballast weight base plate (100 kg)
  • Ballast weight base plate (180 kg)
  • Toolbox tool set hand-operated grease gun
  • Combination Box (for combination bag)
  • Combination Bag (Warning Triangle / First Aid Kit)
  • Centralized lubrication system fully automatic
  • Tow bar with ball head, K50
  • 38 mm hitch, automatic
  • 38 mm hitch, automatic
  • Tractor Implements

Editions

  • Foldable driver’s canopy eps
  • Rotating beacon (orange) with magnetic base
  • Reverse warning system (acoustic)
  • Pressure-less return line in front (1 x flatface size 3, plug) incl. leakage oil line (1 x flatface size 2, plug)
  • Cabin 2-single part doors including heating and ventilation
  • Radio preparation DAB+ (antenna, loudspeaker)
  • Seat fabric; MSG83
  • LED rotating beacon (orange)
  • PA940 planetary axle, hydrostatic medium-pressure four-wheel drive, differential lock 100%
  • Diesel engine Yanmar / 3TNV86 / 33.3 kW (45 HP) / (use from -15°C to +45 °C!)
  • Manual throttle
  • Drive mode Auto / Eco / attachments
  • Proportional speed limiter (low-speed system)
  • 3rd control circuit proportional incl. continuous function via switch
  • Working hydraulics 22.5 ccm (58.5 l/min)
  • Pressure-less return line in front (1 x flatface size 3, plug) incl. leakage oil line (1 x flatface size 2, plug)
  • Socket front 13-pin, push button / locking; E1 / E2; lighting
  • Reverse warning system (acoustic)
  • Ballast weight floor plate (180 kg)

 

 

Contact us

* Mandatory fields
Contact Contact

Contact

Phone number: +31 88 505 7510